OnAir

Decode CW keying quality meter with an SDR

CW keying: wpm, dah ratio, gaps, weight, rise, chirp.

In the mode list
Event

What CW keying quality meter is

CW keying quality meter for a keyed carrier within 1.5 kHz of the tuned frequency: speed in wpm (PARIS), dit and dah lengths and their ratio (ideal 3), element, character and word gaps as multiples of the dit, weight, dit scatter (keyer or hand), rise and fall times of the edges (key clicks) and chirp. Rise times under about 1.5 ms read 1.5 ms. Does not copy the text. Simulated signals only.

Frequencies and settings

Morse code on the HF bands.

OnAir takes any frequency you type; the numbers above are the mode's starting point and the range its table describes. In the app the shortcut label is Event.

What OnAir shows

Every CW signal in a 14 kHz window at once: speed, SNR and text, callsigns highlighted.

Limits and what it was checked with

Checked with generated signals and impairments; recordings of real signals welcome.

Which radio you need

This is a shortwave mode, so the radio has to tune HF. An SDRplay, Airspy HF+ or an RTL-SDR in direct-sampling mode do that directly; with a HackRF an HF upconverter or a direct-sampling receiver is the usual route. A long wire or loop antenna matters more than the radio.

Receiving and the law

Receiving and the law. These tools only look at the spectrum and listen. Receiving is legal in most countries, but laws differ on what you may use the content for. See also Legal.

Questions about CW keying quality meter

Can I decode CW keying quality meter with an RTL-SDR?

An RTL-SDR can receive HF only in direct-sampling mode, which OnAir offers in its radio settings; results depend on the antenna. SDRplay and Airspy HF+ radios are better suited.

Is it legal to receive CW keying quality meter?

These tools only look at the spectrum and listen. Receiving is legal in most countries, but laws differ on what you may use the content for.

Can I try CW keying quality meter in OnAir without a radio?

Yes. Most modes include a built-in synthetic test signal, so you can open the screen and try the controls before you own a radio.