OnAir

Decode OpenSky identifier with an SDR

OpenSky: identification only, the channel is measured and nothing is decoded.

In the mode list
identify only

What OpenSky identifier is

OpenSky (M/A-COM / Harris) identifier: measures the symbol rate, the levels, the width and the TDMA burst pattern; the air interface is not public and the traffic is encrypted, so nothing is decoded.

Frequencies and settings

OnAir takes any frequency you type; the numbers above are the mode's starting point and the range its table describes. In the app the shortcut label is identify only.

What OnAir shows

OpenSky (M/A-COM / Harris) identifier: measures the symbol rate, the levels, the width and the TDMA burst pattern; the air interface is not public and the traffic is encrypted, so nothing is decoded.

Limits and what it was checked with

Checked with generated signals and impairments; recordings of real signals welcome.

Which radio you need

Any radio that tunes this range works. An RTL-SDR covers roughly 24 MHz to 1.7 GHz, and every other radio in the radio guide reaches it too. Antenna height and a clear view of the transmitter matter most.

Receiving and the law

Receiving and the law. In many countries it is illegal to intercept or disclose private radio communications. OnAir is a receiver: encrypted calls show up only as encrypted and are never decrypted, and voice needs a library you install yourself. Follow the law where you live. See also Legal.

Questions about OpenSky identifier

Can I decode OpenSky identifier with an RTL-SDR?

Usually yes for narrowband signals, as an RTL-SDR tunes roughly 24 MHz to 1.7 GHz at up to about 2.4 Msps. Wide signals such as TV channels need a faster radio, and OnAir says next to the source what the selected radio can do.

Is it legal to receive OpenSky identifier?

In many countries it is illegal to intercept or disclose private radio communications. OnAir is a receiver: encrypted calls show up only as encrypted and are never decrypted, and voice needs a library you install yourself. Follow the law where you live.

Can I try OpenSky identifier in OnAir without a radio?

Yes. Most modes include a built-in synthetic test signal, so you can open the screen and try the controls before you own a radio.