OnAir

Decode MDC-1200 with an SDR

MDC-1200: unit ID, opcode and argument of each burst, with the carrier it came on (receive only; Kenwood FleetSync is a separate mode).

In the mode list
1200 bit/s burst on FM
GitHub wiki
Mode-MDC-1200

What MDC-1200 is

MDC-1200 (Motorola) unit ID bursts on analog FM: every FM carrier of the span is followed and the 1200 bit/s burst that opens or closes a transmission is decoded. Kenwood FleetSync is a separate mode.

Frequencies and settings

OnAir takes any frequency you type; the numbers above are the mode's starting point and the range its table describes. In the app the shortcut label is 1200 bit/s burst on FM.

What OnAir shows

MDC-1200 (Motorola) unit ID bursts on analog FM: every FM carrier of the span is followed and the 1200 bit/s burst that opens or closes a transmission is decoded. Kenwood FleetSync is a separate mode.

Limits and what it was checked with

Checked with generated signals and impairments; recordings of real signals welcome.

Which radio you need

Any radio that tunes this range works. An RTL-SDR covers roughly 24 MHz to 1.7 GHz, and every other radio in the radio guide reaches it too. Antenna height and a clear view of the transmitter matter most.

Receiving and the law

Receiving and the law. In many countries it is illegal to intercept or disclose private radio communications. OnAir is a receiver: encrypted calls show up only as encrypted and are never decrypted, and voice needs a library you install yourself. Follow the law where you live. See also Legal.

Questions about MDC-1200

Can I decode MDC-1200 with an RTL-SDR?

Usually yes for narrowband signals, as an RTL-SDR tunes roughly 24 MHz to 1.7 GHz at up to about 2.4 Msps. Wide signals such as TV channels need a faster radio, and OnAir says next to the source what the selected radio can do.

Is it legal to receive MDC-1200?

In many countries it is illegal to intercept or disclose private radio communications. OnAir is a receiver: encrypted calls show up only as encrypted and are never decrypted, and voice needs a library you install yourself. Follow the law where you live.

Can I try MDC-1200 in OnAir without a radio?

Yes. Most modes include a built-in synthetic test signal, so you can open the screen and try the controls before you own a radio.