Decode FRS / GMRS with an SDR
FRS / GMRS: channels 1 to 22, the CTCSS / DCS tone heard on each, call log and recording (receive only).
- Group
- Two-way radio
- In the mode list
- 462 / 467 MHz, NFM + CTCSS / DCS
- GitHub wiki
- Mode-FRS / GMRS
What FRS / GMRS is
FRS and GMRS (USA, Canada) 462 and 467 MHz, 22 channels, narrow FM with the CTCSS tone or DCS code of each transmission, GMRS repeater outputs, a busy-channel list and a scan.
Frequencies and settings
OnAir takes any frequency you type; the numbers above are the mode's starting point and the range its table describes. In the app the shortcut label is 462 / 467 MHz, NFM + CTCSS / DCS.
What OnAir shows
FRS and GMRS (USA, Canada) 462 and 467 MHz, 22 channels, narrow FM with the CTCSS tone or DCS code of each transmission, GMRS repeater outputs, a busy-channel list and a scan.
Limits and what it was checked with
Checked with generated signals and impairments; recordings of real signals welcome.
Which radio you need
Any radio that tunes this range works. An RTL-SDR covers roughly 24 MHz to 1.7 GHz, and every other radio in the radio guide reaches it too. Antenna height and a clear view of the transmitter matter most.
Receiving and the law
Questions about FRS / GMRS
Can I decode FRS / GMRS with an RTL-SDR?
Usually yes for narrowband signals, as an RTL-SDR tunes roughly 24 MHz to 1.7 GHz at up to about 2.4 Msps. Wide signals such as TV channels need a faster radio, and OnAir says next to the source what the selected radio can do.
Is it legal to receive FRS / GMRS?
In many countries it is illegal to intercept or disclose private radio communications. OnAir is a receiver: encrypted calls show up only as encrypted and are never decrypted, and voice needs a library you install yourself. Follow the law where you live.
Can I try FRS / GMRS in OnAir without a radio?
Yes. Most modes include a built-in synthetic test signal, so you can open the screen and try the controls before you own a radio.