Decode LTR trunking with an SDR
LTR trunking: the subaudible control words of an analog trunked system.
- Group
- Two-way radio
- In the mode list
- 300 bit/s subaudible
- GitHub wiki
- Mode-LTR trunking
What LTR trunking is
LTR (Logic Trunked Radio) sends 300 bit/s subaudible control words on a repeater channel. OnAir shows the control data only (check bits are shown, not verified). In development.
Frequencies and settings
OnAir takes any frequency you type; the numbers above are the mode's starting point and the range its table describes. In the app the shortcut label is 300 bit/s subaudible.
What OnAir shows
LTR (Logic Trunked Radio) control data: the 300 bit/s subaudible words on a repeater channel (area, go-to, home, ID, free repeater). Control data only, no voice; every word is accepted only when its 7 check bits verify (receive only).
Limits and what it was checked with
In development: tested on generated signals with simulated noise only, never on the air. Recordings welcome.
Which radio you need
Any radio that tunes this range works. An RTL-SDR covers roughly 24 MHz to 1.7 GHz, and every other radio in the radio guide reaches it too. Antenna height and a clear view of the transmitter matter most.
Receiving and the law
Questions about LTR trunking
Can I decode LTR trunking with an RTL-SDR?
Usually yes for narrowband signals, as an RTL-SDR tunes roughly 24 MHz to 1.7 GHz at up to about 2.4 Msps. Wide signals such as TV channels need a faster radio, and OnAir says next to the source what the selected radio can do.
Is it legal to receive LTR trunking?
In many countries it is illegal to intercept or disclose private radio communications. OnAir is a receiver: encrypted calls show up only as encrypted and are never decrypted, and voice needs a library you install yourself. Follow the law where you live.
Can I try LTR trunking in OnAir without a radio?
Yes. Most modes include a built-in synthetic test signal, so you can open the screen and try the controls before you own a radio.