OnAir

Decode AM modulation monitor with an SDR

AM monitor: depth, peaks, hum, bandwidth.

In the mode list
Event

What AM modulation monitor is

AM broadcast modulation monitor (LW, MW, SW): the carrier offset, modulation depth, positive and negative peaks, asymmetry, mains hum, audio bandwidth and over-modulation of one station, with loss and return of the carrier logged. A reading of what arrives, not a type-approval instrument. Simulated signals only.

Frequencies and settings

OnAir takes any frequency you type; the numbers above are the mode's starting point and the range its table describes. In the app the shortcut label is Event.

What OnAir shows

AM broadcast modulation monitor (LW, MW, SW): the carrier offset, modulation depth, positive and negative peaks, asymmetry, mains hum, audio bandwidth and over-modulation of one station, with loss and return of the carrier logged. A reading of what arrives, not a type-approval instrument. Simulated signals only.

Limits and what it was checked with

Checked with generated signals and impairments; recordings of real signals welcome.

Which radio you need

Any radio that tunes this range works. An RTL-SDR covers roughly 24 MHz to 1.7 GHz, and every other radio in the radio guide reaches it too. Antenna height and a clear view of the transmitter matter most.

Receiving and the law

Receiving and the law. Receiving broadcast radio is legal in most countries. OnAir cannot decode encrypted services. See also Legal.

Questions about AM modulation monitor

Can I decode AM modulation monitor with an RTL-SDR?

Usually yes for narrowband signals, as an RTL-SDR tunes roughly 24 MHz to 1.7 GHz at up to about 2.4 Msps. Wide signals such as TV channels need a faster radio, and OnAir says next to the source what the selected radio can do.

Is it legal to receive AM modulation monitor?

Receiving broadcast radio is legal in most countries. OnAir cannot decode encrypted services.

Can I try AM modulation monitor in OnAir without a radio?

Yes. Most modes include a built-in synthetic test signal, so you can open the screen and try the controls before you own a radio.