Decode Marine radar (detect) with an SDR
Marine radar: rotation and pulse pattern.
- Group
- Maritime
- In the mode list
- Radar pulses
- GitHub wiki
- Mode-Marine radar (detect)
What Marine radar (detect) is
Pulse radar detection (S or X band with a suitable receiver): rotation rate, pulse repetition frequency, pulse width and beamwidth from the beam passing. A bearing needs direction finding with two coherent channels. FMCW radars are not seen.
Frequencies and settings
OnAir takes any frequency you type; the numbers above are the mode's starting point and the range its table describes. In the app the shortcut label is Radar pulses.
What OnAir shows
Pulse radar detection (S or X band with a suitable receiver): rotation rate, pulse repetition frequency, pulse width and beamwidth from the beam passing. A bearing needs direction finding with two coherent channels. FMCW radars are not seen.
Limits and what it was checked with
Checked with generated signals and impairments; recordings of real signals welcome.
Which radio you need
Any radio that tunes this range works. An RTL-SDR covers roughly 24 MHz to 1.7 GHz, and every other radio in the radio guide reaches it too. Antenna height and a clear view of the transmitter matter most.
Receiving and the law
Questions about Marine radar (detect)
Can I decode Marine radar (detect) with an RTL-SDR?
Usually yes for narrowband signals, as an RTL-SDR tunes roughly 24 MHz to 1.7 GHz at up to about 2.4 Msps. Wide signals such as TV channels need a faster radio, and OnAir says next to the source what the selected radio can do.
Is it legal to receive Marine radar (detect)?
Receiving ship and coast-station broadcasts is legal in many countries, with limits on using or passing on private traffic. OnAir is a receiver. Check the rules where you live.
Can I try Marine radar (detect) in OnAir without a radio?
Yes. Most modes include a built-in synthetic test signal, so you can open the screen and try the controls before you own a radio.