OnAir

Decode Golay paging (GSC) with an SDR

GSC pager messages (simulated only).

Group
Pagers
In the mode list
Pagers, 300 / 600 bit/s

What Golay paging (GSC) is

Golay Sequential Code (GSC), Motorola's one-way paging format: 2-FSK, the preamble, start code and Golay (23,12) address words at 300 bit/s, the comma and the BCH (15,7) data blocks at 600 bit/s. Receive only: tone-only pages, numeric and alphanumeric pages, and tone-and-voice pages (flagged: the voice is analog audio after the address, it is not decoded), with the pager code, the address….

Frequencies and settings

OnAir takes any frequency you type; the numbers above are the mode's starting point and the range its table describes. In the app the shortcut label is Pagers, 300 / 600 bit/s.

What OnAir shows

Golay Sequential Code (GSC), Motorola's one-way paging format: 2-FSK, the preamble, start code and Golay (23,12) address words at 300 bit/s, the comma and the BCH (15,7) data blocks at 600 bit/s. Receive only: tone-only pages, numeric and alphanumeric pages, and tone-and-voice pages (flagged: the voice is analog audio after the address, it is not decoded), with the pager code, the address function, the battery-saver preamble and single-call or batch mode. Simulated signals only so far; no GSC recording was available.

Limits and what it was checked with

Checked with generated signals and impairments; recordings of real signals welcome.

Which radio you need

Any radio that tunes this range works. An RTL-SDR covers roughly 24 MHz to 1.7 GHz, and every other radio in the radio guide reaches it too. Antenna height and a clear view of the transmitter matter most.

Receiving and the law

Receiving and the law. Pager messages can contain private information, and some countries restrict listening to them. Check the rules where you live before you use this mode. See also Legal.

Questions about Golay paging (GSC)

Can I decode Golay paging (GSC) with an RTL-SDR?

Usually yes for narrowband signals, as an RTL-SDR tunes roughly 24 MHz to 1.7 GHz at up to about 2.4 Msps. Wide signals such as TV channels need a faster radio, and OnAir says next to the source what the selected radio can do.

Is it legal to receive Golay paging (GSC)?

Pager messages can contain private information, and some countries restrict listening to them. Check the rules where you live before you use this mode.

Can I try Golay paging (GSC) in OnAir without a radio?

Yes. Most modes include a built-in synthetic test signal, so you can open the screen and try the controls before you own a radio.