Decode DVB-C2 with an SDR
DVB-C2 second generation digital cable television (OFDM), needs the cable network as the input (not an antenna).
- Group
- TV
- In the mode list
- Cable, OFDM
- GitHub wiki
- Mode-DVB-C2
What DVB-C2 is
DVB-C2 cable TV (EN 302 769): 4K OFDM, guard interval 1/64 or 1/128, the L1 signalling, Data Slice Types 1 and 2, 16 to 4096-QAM with 16K and 64K LDPC, transport streams and GSE (IP); needs a cable feed. Simulated signals only so far.
Frequencies and settings
Cable TV, EN 300 429 / J.83 annex A and C, 16 to 256-QAM (needs a cable feed).
OnAir takes any frequency you type; the numbers above are the mode's starting point and the range its table describes. In the app the shortcut label is Cable, OFDM.
What OnAir shows
Symbol rate and QAM found automatically, channels and playback.
Limits and what it was checked with
Checked with generated signals and impairments; recordings of real signals welcome.
Which radio you need
Any radio that tunes this range works. An RTL-SDR covers roughly 24 MHz to 1.7 GHz, and every other radio in the radio guide reaches it too. Antenna height and a clear view of the transmitter matter most.
Receiving and the law
Questions about DVB-C2
Can I decode DVB-C2 with an RTL-SDR?
No: wide TV channels need a radio that samples faster than an RTL-SDR, which reaches about 2.4 Msps. See the radio guide.
Is it legal to receive DVB-C2?
Receiving free-to-air broadcasts is legal in most countries. OnAir cannot decode encrypted or scrambled services, and does not try to.
Can I try DVB-C2 in OnAir without a radio?
Yes. Most modes include a built-in synthetic test signal, so you can open the screen and try the controls before you own a radio.